Rossinavi 49M Prince Shark Alusteel

Rossinavi 49M Prince Shark Alusteel

Under construction at the well know Rossinavi Shipyard in Viareggio. unique opportunity to shorten your build time by one year and take delivery of this exciting project spring 2016. Interior still open to buyers choice.

Master cabin main deck forward. Guest suites lower deck.

The interiors preliminary and constructional design will be performed by the Architects; the relevant works will be performed by well proven ability craftsmen. The quality level of the interiors will be at the level of good Builder’s standard; Param jamuna IV vessel can be taken as a reference. The woods and the lining materials will be chosen by the Buyer, in agreement with the Architects, between samples provided by the Builder (as an indication, the essences to be chosen between cherry, ash, maple, mahogany and similar woods).The marbles will be of the A class gamma (as an indication, Travertino, Botticino, Calacatta luccicoso, Cremo delicato) restricted to the Guest and Owner bathroom, as described in the following.

FLOORS
As a general rule the floors will be as follows:
Wheelhouse, saloon, Gym and Dining area: parquet with 4 mm about 1st quality veneering on top, glued to the marine plywood grating planks
Guest’s and Owner’s cabins: Moquette
Guest’s, Owner’s and Day-toilets bathrooms and main deck lobby: low thickness stone or marble
Guest’s and Owner’s showers: low thickness stone or marble
Galley, crew accommodation, pantries: Rubber tiles glued on the gratings
Technical spaces: antiskid compound

LININGS
The linings, as a general rule, will be as follows:

Ceilings linings:
The ceilings in the accommodation will be lined as follows:
Guests and Owner accommodation on the cabin and weather deck, except from the relevant bathrooms: 10 mm thick marine plywood panels lined with leather/fabric or lacquered; the fixing of the panels will be performed by means of fast mount to the wooden supports or by means of “bayonet” holders according to the panels dimensions;
Guest’s and Owner’s bathrooms: 10 mm thick marine plywood panels lacquered (finition to be agreed) and fixed as above;
Galley and crew accommodation: 10 mm thick marine plywood panels veneered with semi-mat laminated plastic and fixed as above.

Sides and partition bulkheads linings:
The panels of the sides and of the partition bulkheads on the sides in view will receive a lining as described below:
Guest’s and Owner’s areas: veneered panels with vertical seams (wood chosen as above).
Guest’s, Owner’s and Day-toilets bathrooms: low thickness stone or marble;
Galley and crew accommodation: veneered panels with semi-mat laminated plastic.

Features: