Aqua Bay Marine Commercial Fishing / Research / Inspected Passenge

Aqua Bay Marine Commercial Fishing / Research / Inspected Passenge - Call Today!

Major Price Reduction, we are giving her away. The Surveyor put 350k on her just last year! This Coast Guard Inspected Commercial Fishing Vessel in excellent condition. Perfect for charter fishing and over-night, even week long trips. Plenty of accommodation and bunks for a huge crew and lots of fishermen. In charter right now and ready fish and make you money! 

64.8\' x 19.7\' x 7.2\' Twin Screw Fishing Charter Vessel Certified for 28 persons, 100 miles offshore

Vessel is an all fiberglass molded hull, with a model bow square stern and semi-deep \"V\". Vessel is twin screw and diesel powered. The hull is arranged with \"V\" berthing forward next is machinery space with storage forward next is fuel tank and rudder room area.  There is a single level all fiberglass cabin with pilot house all way forward on a slightly higher level and next aft is the lounge, galley and mess area.  Just aft the pilot house is the stairway leading to the \"V\" berthing.

Electronics and navigation equipment:

One (1)  Koder Radar Model MD 3441, 32 mile range

One (1)  Loud haler

Two (2) VHF radios-Model ICM 312 ICOM

Two(2)  Garmin GPS-Model GPS228

One (1)  ICOM Single Side Band Radio-Model M700

One (1)  Five (5) inch magnetic compass

One (1)  Raytheon Depth Finder-model 1265

Five (5)  High level bilge alarms

One (1)  Electric Horn

One (1) 10\" Perko Searchlight

Two (2) New 12” incandescent search lights

One (1)  Set approved set of running lights

Two (2) Sets engine and clutch air controls,

Two (2) Main Engine instrument panels

Passenger Lounge:

Three (3) Cabin type air conditioners one each pilot house, berthing and lounge.

Three (3) Rows of two (2) each airplane type seating

One (1)  One lounge chair

One (1) Counter top fitted with a two (2)-basin stainless steel sink and necessary cooking facility.

One (1) Bench seat located on aft side of approximately 3\' x 5\' Formica top table.

Berthing Area:

One (1) 9 man bunkroom located below main deck level with built-in wooden bunks, one (1) head with stainless steel sink, porcelain commode.

DECK GEAR:

The main deck is coated with a non-skid surface.  There is a 32\" high bulwarks, and 11\" high single stainless handrails encompassing the main deck.  Free port appear to be adequate.  Deck fittings consist of 3\" single bitts located at bow sides. One (1) 12\" cleat located at port and starboard sides. and twenty-four (24) fishing rod holders.  One (1) 65# Danford anchor

TANK CAPACITIES:

Fuel Tank:  One (1)1200 gallon capacity aluminum tank

Water Tank:  One (1) 240 gallon capacity aluminum tank

Sewage Tank: One (1) 60 gallon fiberglass tank 

ENGINE ROOM:

Two (2) main engines- Detroit Diesel 12V92 TA, 12 cylinder diesel engines Port serial #12VF010086 and the starboard serial #12VF010087.  The engines are electric started and keel cooled.  Engines exhaust are the wet type.  Engines are coupled to Twin Disc marine reduction gears model 5202V ration 2.03:1. that turn approximately 3\" steel rolled shafts.  The shafts run through adjustable packing glands with double nuts on the adjusting bolts.  

Two (2) 20 KW generator is driven by a four (4) cylinder diesel engine.  The engine is electric started. The engine is keel cooled.  

Four (4) Rule Submersible bilge pump.

One (l) Electric over hydraulic steering system equipped with two (2) approximately 7                               horsepower electric motors that drives a hydraulic pump and approximately  40 gallon                  hydraulic oil storage tank.

One (1)  Potable water pressure set

One (1) Flotec Centrifugal pump fitted with bladder tank.

One (1) Jabsco centrifugal fire pump driven by a fractional horsepower electric motor.

One (1) Approximately 20 gall electric water heater.

Electrical wiring is the armor and rubber covered commercial grade throughout.  There is shore connection on each port and starboard side of the cockpit area.

Steering system is manual/hydraulic.

Features: